| Precipitation |
One file per sensor, geopositionRain gauge tips at 0.254, 0.2, or 0.1 mm; or cumulative values at 5 or 30 min resolution |
Tip depuration,Cubic spline interpolation on the cumulative rainfall curve,Rainfall accumulation,Data gap filling |
One file per catchment,Precipitation time series at maximum temporal resolution matching discharge, and at 1 hr and 1 day resolutions |
Units: rainfall (mm).Some stations (JTU, CHA) lack rain gauge tip data as the logger was programmed to store cumulative values only |
| Streamflow |
One file per sensor, geoposition,Water level instantaneous measurements at 5, 15, or 30 min resolution |
Water level validation,Discharge calculation,Restricted data gap filling |
One file per catchment,Streamflow time series at maximum temporal resolution, and at 1 hr and 1 day resolutions |
Units: water level (cm), streamflow (l s−1 km−2).Weir dimensions used to convert water level to discharge for each station in Table 6 |
| Catchment characteristics |
Geographic information data |
Calculations using Geographic Information Systems software and custom scripts |
Matrix of physical characteristics (rows) for each catchment (columns)Maps of each catchment or pair of catchments |
Categories: shape, drainage, elevation, topography, subsurface, climate, rainfall intensity, land cover and land use |
| Hydrological indices |
|
Hydrological index calculation based on custom scripts, averaged over their monitoring periods |
Matrix of hydrological indices (rows) for each catchment (columns) |
Categories: water yield, hydrological regulation, water balance, magnitude, frequency, duration, timing, flashiness |
