Figure - PMC

Skip to main content

An official website of the United States government

Here's how you know

Here's how you know

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

View full-text article in PMC

. 2018 Mar 9;100(4):919–943. doi: 10.1007/s10494-018-9896-4

Search in PMC
Search in PubMed
View in NLM Catalog
Add to search

© The Author(s) 2018

Open AccessThis article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

PMC Copyright notice

Fig. 10 — Ratio of flow rate injected into the main pipe through the concentric gap. The gap width is a 1 mm and b 2 mm. For increasing Reynolds numbers max and min depict the maximum and minimum injection flow rates that cause total relaminarization. All flow rate ratios in between also lead to relaminarization. For the cases c1-c4 at Re = 4000 and Re = 5000 in (b) marked by a see the text

Inline graphic — Ratio of flow rate injected into the main pipe through the concentric gap. The gap width is a 1 mm and b 2 mm. For increasing Reynolds numbers max and min depict the maximum and minimum injection flow rates that cause total relaminarization. All flow rate ratios in between also lead to relaminarization. For the cases c1-c4 at Re = 4000 and Re = 5000 in (b) marked by a see the text