Table 2.

Summary of mean geometric and stress/strain parameter values at begin of ejection

	WT (cm)	C-cur (1/cm)	L-cur (1/cm)	RV EDV (cm3)	Stress-P1 (kPa)	Strain-P1
HG
H1	0.35	1.15	0.87	125.2	70.2	0.63
H2	0.68	0.68	0.56	227.1	51.6	0.58
H3	0.64	0.77	0.68	226.7	36.3	0.40
H4	0.51	0.62	0.61	213.1	56.0	0.39
H5	0.57	0.57	1.27	232.6	45.9	0.57
H6	0.31	0.90	1.11	66.37	48.0	0.51
Mean ± SD	0.51 ±0.15	0.81 ±0.19	0.85 ±0.29	183.6 ±69.4	51.3 ±11.4	0.51 ±0.10
BPG
P1	0.39	0.47	1.24	406.9	56.9	0.29
P2	0.47	0.43	0.96	323.3	82.4	0.44
P3	0.48	0.50	1.20	204.0	61.9	0.48
P4	0.42	0.53	1.84	193.7	33.5	0.46
P5	0.51	0.53	1.85	188.3	42.0	0.40
Mean ± SD	0.45 ±0.05	0.49 ±0.04	1.42 ±0.40	263.2 ±97.7	55.3 ±18.9	0.41 ±0.08
WPG
P6	0.34	0.39	0.77	328.8	65.3	0.43
P7	0.65	0.37	1.01	408.8	41.0	0.33
P8	0.49	0.54	1.54	364.6	64.1	0.36
P9	0.48	0.42	0.91	385.1	172.1	0.66
P10	0.41	1.34	1.32	204.2	82.9	0.49
P11	0.80	0.36	0.59	665.1	82.4	0.23
P12	0.71	0.44	0.72	334.8	83.1	0.42
P13	0.45	0.46	0.97	277.2	191.7	0.66
P14	0.43	0.65	1.60	365.0	65.4	0.44
P15	0.46	0.44	1.23	299.0	154.3	0.51
P16	0.59	0.33	1.25	571.1	76.2	0.34
Mean ± SD	0.53 ±0.14	0.52 ±0.29	1.08 ±0.33	382.2 ±131.1	98.0 ±50.1	0.44 ±0.13

Abbreviations: WT: wall thickness; C-cur: circumferential curvature; L-cur: longitudinal curvature