Table 3.

Placket–Burman design of experiment with reservoir uncertainties.

PLACKETT-BURMAN DESIGN OF EXPERIMENT (DOE) FOR 15 FACTORS
The design is for 16 runs (the rows of dPB) manipulating 15 two-level factors (the last seven columns of dPB)
The number of runs is a fraction 16/((2^15))=0. 00,048,828,125 of the runs required by a full factorial design.
Run No.	Dip	OGR	Ho (ft.)	m-Factor	Aqfac	Kx, Ky	Kv/Kh	Bore Diam. (ft)	OIL DENSITY	HGOC (ft.)	HWL (ft.)	Qo	Krw	GOR (*Rsi)	BHP (psia0
Model 1	6	0.04	70	6	6	3500	0.1	0.55	47	0.6	1800	3500	0.6	7.5	2200
Model 2	1	0.04	20	6	0.7	3500	0.001	0.55	37	0.6	1200	3500	0.2	7.5	1500
Model 3	6	0.006	20	6	6	35	0.001	0.55	47	0.25	1200	3500	0.6	2.5	1500
Model 4	1	0.006	70	6	0.7	35	0.1	0.55	37	0.25	1800	3500	0.2	2.5	2200
Model 5	6	0.04	70	0.7	0.7	35	0.001	0.55	47	0.6	1800	1200	0.2	2.5	1500
Model 6	1	0.04	20	0.7	6	35	0.1	0.55	37	0.6	1200	1200	0.6	2.5	2200
Model 7	6	0.006	20	0.7	0.7	3500	0.1	0.55	47	0.25	1200	1200	0.2	7.5	2200
Model 8	1	0.006	70	0.7	6	3500	0.001	0.55	37	0.25	1800	1200	0.6	7.5	1500
Model 9	6	0.04	70	6	6	3500	0.1	0.35	37	0.25	1200	1200	0.2	2.5	1500
Model 10	1	0.04	20	6	0.7	3500	0.001	0.35	47	0.25	1800	1200	0.6	2.5	2200
Model 11	6	0.006	20	6	6	35	0.001	0.35	37	0.6	1800	1200	0.2	7.5	2200
Model 12	1	0.006	70	6	0.7	35	0.1	0.35	47	0.6	1200	1200	0.6	7.5	1500
Model 13	6	0.04	70	0.7	0.7	35	0.001	0.35	37	0.25	1200	3500	0.6	7.5	2200
Model 14	1	0.04	20	0.7	6	35	0.1	0.35	47	0.25	1800	3500	0.2	7.5	1500
Model 15	6	0.006	20	0.7	0.7	3500	0.1	0.35	37	0.6	1800	3500	0.6	2.5	1500
Model 16	1	0.006	70	0.7	6	3500	0.001	0.35	47	0.6	1200	3500	0.2	2.5	2200
Model 17	1	0.006	20	0.7	0.7	35	0.001	0.35	37	0.25	1200	1200	0.2	2.5	1500
Model 18	4	0.03	40	3	3	350	0.01	0.45	42	0.45	1500	2200	0.35	5	1800