Table 6.
Response/Cutting Parameters | Goal | Lowest Value | Highest Value |
---|---|---|---|
Surface roughness (µm) | Minimum | - | - |
Spindle speed (rpm) | In the range | 10,000 | 20,000 |
Feed rate (mm/min) | In the range | 50 | 150 |
Depth of cut (µm) | In the range | 5 | 15 |
Response/Cutting Parameters | Goal | Lowest Value | Highest Value |
---|---|---|---|
Surface roughness (µm) | Minimum | - | - |
Spindle speed (rpm) | In the range | 10,000 | 20,000 |
Feed rate (mm/min) | In the range | 50 | 150 |
Depth of cut (µm) | In the range | 5 | 15 |