Skip to main content
. 2018 Oct 17;9(10):525. doi: 10.3390/mi9100525

Table 3.

Case study of droplet(s) with constant stiffness (162 N/m), the contact angle is 110° top and bottom. The diameter of the top wetting region is the same as in case study 1.

# of Droplets Volume of Each Droplet (µL) Aspect Ratio (h/D) Diameter of the Drop (mm) Height of the Gap (mm) Minimum Total Area Required (mm2) Total Projected Length (mm)
1 3.8 0.015452 6.8 0.105 36.3 6.8
3 2.1 0.026764 4.6 0.123 49.9 13.8
5 1.7 0.034553 4 0.138 62.8 20
7 1.6 0.040883 3.7 0.151 75.3 25.9