Skip to main content
. 2018 Nov 19;18(11):4031. doi: 10.3390/s18114031

Table 1.

Cutting parameters used in the experiments.

Test No. Spindle Speed (rpm) Feedrate (mm/min) Axial Cutting Depth (mm) Radial Cutting Depth (mm)
1 2000 250 2.0 1.0
2 2000 250 3.0 2.0
3 2000 250 3.0 3.0
4 3000 500 3.0 3.0
5 3000 250 3.0 3.0
6 4000 500 1.0 3.0
7 4000 500 3.0 3.0