Skip to main content
. 2018 Nov 13;11(11):2258. doi: 10.3390/ma11112258

Table 1.

Characteristics of the polymers a.

Polymer 5:7 b Yield c (%) Mn d (×104) Mw/Mnd Tge (°C) Tdf (°C) θwater g (°) θBioctyl g (°) 5:7 h (%) F i (%)
6 0 79 59.47 248.27 113.84 65.55 58.07
Poly(5-co-BMA) 1:1 59 1.07 1.22 52.76 238.97 102.37 46.23 80.4 42.92
1:2 63 1.41 1.43 51.27 236.73 100.03 44.52 27.6 27.73
1:6 87 2.85 5.81 46.21 245.21 99.74 43.27 22.0 22.96
1:8 76 2.16 1.83 42.82 243.73 97.41 42.68 14.4 17.40
1:15 71 4.50 4.12 41.64 234.02 95.32 40.47 6.8 9.41
Poly(5-co-MMA) 1:1 66 1.02 1.55 49.40 232.34 85.06 52.70 87.8
1:2 74 1.02 1.31 56.02 253.24 60.74 48.62 60.8
1:6 81 1.56 1.43 68.65 249.97 32.49 45.37 36.2
1:8 81 1.87 1.60 84.80 244.18 30.57 42.35 29.6
1:15 68 1.67 1.62 103.80 241.27 18.58 36.53 15.2
Poly(5-co-EMA) 1:1 59 1.36 1.25 58.13 240.72 106.83 54.90 83.6
1:2 77 1.45 1.74 53.71 241.09 101.64 50.53 30.8
1:6 67 2.14 1.69 53.34 236.24 99.93 45.03 22.0
1:8 59 3.13 1.91 52.15 241.08 95.64 42.10 10.4
1:15 57.9 3.70 1.951 53.10 249.92 97.86 39.64 8.2
Poly(5-co-HMA) 1:1 68 1.90 1.66 11.28 229.64 103.37 51.78 74.8
1:2 69 1.27 1.74 12.12 231.20 96.46 49.13 27.6
1:6 79 2.72 8.83 1.76 239.61 97.39 36.96 13.6
1:8 78 2.71 5.11 −0.61 242.75 95.87 35.05 8.8
1:15 88 2.05 3.13 −5.06 246.26 98.12 34.75 4.0
Poly(5-co-OMA) 1:1 58 1.04 1.44 3.43 234.90 97.20 41.81 74.8
1:2 64 1.37 2.07 5.12 217.04 103.28 30.31 21.1
1:6 67 2.49 4.13 6.94 242.10 109.28 27.04 12.8
1:8 61 1.94 2.92 6.89 240.13 109.47 22.20 8.0
1:15 94 1.81 2.12 9.58 248.13 109.20 18.26 3.2
Poly(5-co-LMA) 1:1 59 1.10 1.53 −1.60 220.47 102.59 37.66 49.6
1:2 65 1.57 1.70 −25.08 234.45 99.10 33.51 20.8
1:6 67 2.24 2.20 −48.8 234.39 95.09 26.48 14.8
1:8 67 2.26 2.15 −51.17 234.12 92.02 26.04 9.6
1:15 88 2.31 2.24 −44.76 248.65 113.23 19.51 2.4
Poly(5-co-SMA) 1:1 67 1.63 1.81 14.36 283.71 107.18 37.06 34.4
1:2 74 2.23 2.37 25.61 283.35 106.99 36.39 19.6
1:6 91 5.13 5.51 29.76 344.39 104.42 30.64 10.0
1:8 97 4.13 3.78 30.69 349.30 99.68 19.34 5.2
1:15 80 2.45 2.41 33.48 354.89 95.98 5.26 0.8

a: Reaction conditions: 20% solution in toluene, 0.03 equiv. of AIBN, 80 °C in Ar; b: Feed molar ratio of 5 to 7; c: Isolated yield; d: The number-average molecular weight (Mn) and the polydispersity (Mw/Mn) were determined by GPC; e: Tg As determined by DSC; f: Td As determined by TGA; g: Contact angles of water and n-hexadecane on polymer film (θwater and θBioctyl); h: Molar ratios of 5 and 7 in the copolymer was determined by 1H NMR spectroscopy; i: As determined by elemental analysis.