Skip to main content
. Author manuscript; available in PMC: 2019 Dec 1.
Published in final edited form as: Biomaterials. 2018 Sep 18;185:194–204. doi: 10.1016/j.biomaterials.2018.09.027

Figure 2.

Figure 2.

Custom setup with modified paste extruder based on HYREL EMO-25 with UV LED and heat sink for printing photocurable emulsion inks with Cure-on-Dispense (CoD) (A), g-code rendering of the model (B), representative μCT images (C), and SEM micrograph of the emulsion templated microporosity (D).