Table 7.
Reported ranges of values for some main mechanical and electromechanical model parameters.
| Parameters | Ranges of values | References |
|---|---|---|
| Passive Mooney-Rivlin material parameters | c 1 = c2 = 0.01MPa | Röhrle [68] |
| Activation level | α = [0 → 1] | Blemker et al. [39]; Röhrle and Pullan [57] |
| Constant Cauchy stress in passive part | σ passive ff = 0.3MPa | Röhrle and Pullan [57] |
| Constant Cauchy stress in active part | σ active ff = 0.3MPa | Röhrle and Pullan [57] |
| Optimal fiber stretch length | λ ofl = 1.4 | Blemker et al. [39]; Röhrle and Pullan [57] |
| Maximal contractile stress | σ = 0.03 MPa | Röhrle [68] |
| Peak stress | σ 0 = [0.46 0.6688]MPa | Martins et al. [35]; Toumanidou and Noailly [52]; Fan et al. [59] |
| Maximum isometric stress | σ max = [0.22 − 0.3]MPa | Tang et al. [41]; Blemker et al. [39] |
| Resting calcium level | Ca0 = 0.01μM | Fernandez et al. [38] |
| Intracellular calcium concentration | [Ca2+]max = 2.5mM | Fernandez et al. [38] |
| Intracellular conductivity | σ i = 0.6mS mm−1 | Fernandez et al. [38] |
| Extracellular conductivity | σ e = 0.6mS mm−1 | Fernandez et al. [38] |
| Surface-to-volume ratio of the cell | A m = 80mm−1 | Fernandez et al. [38] |
| Capacitance of the cell membrane | C m = 0.009μF mm−2 | Fernandez et al. [38] |