Skip to main content
. 2018 Dec 20;12(1):12. doi: 10.3390/ma12010012

Table 2.

The SLM process parameters used for building the Al6061_200C samples.

Sample P
(W)		 Vs
(mm/s)		 Dh
(mm)		 Ed
(J/mm3)		 Sample P
(W)		 Vs
(mm/s)		 Dh
(mm)		 Ed
(J/mm3)
1A 370 1000 0.1 123.3 11A 370 800 0.15 102.8
2A 300 1000 0.1 100 12A 350 800 0.15 97.2
3A 370 1300 0.1 95 13A 370 800 0.19 81.1
4A 300 1300 0.1 76.9 14A 350 800 0.19 76.8
5A 370 1000 0.19 65 15A 370 1300 0.15 63.2
6A 300 1000 0.19 52.6 16A 350 1300 0.15 59.8
7A 370 1300 0.19 50 17A 370 1300 0.19 50
8A 300 1300 0.19 40.5 18A 350 1300 0.19 47.2