Table 1. List of all relevant 3D-printed samples. Every print is determined by its geometry ID (cuboid, bone, finger), unit cell rule (CE, CF), wall thickness of skin and bone, lattice thickening, cubic rule size, corrected rule size after thickening, positive/negative skin and bone offsets, materials (skin, bone, lattice, volume) and SUP ratio. The table also shows, if the sample is included in the expert study design. Missing sample print ID’s were lack prints.
| ID | Rule | Thickskin (mm) | Thickbone (mm) | Thicklatt (mm) | Rule size (mm) | Rule size corr. (mm) | Offsetskin (mm) | Offsetbone (mm) | Matskin | Matbone | Matlatt | Matvol | SUP (%) | Study |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C01 | – | 2.0 | – | – | – | – | – | – | FLX930 | – | – | FLX930 | – | Yes |
| C05 | CE | 2.0 | – | 2.0 | 7.0 | 5.0 | −2.0 | – | FLX930 | – | FLX930 | SUP705 | 46.99 | No |
| C06 | CE | 2.0 | – | 2.0 | 5.0 | 3.0 | −2.0 | – | FLX930 | – | FLX930 | SUP705 | 45.78 | Yes |
| C07 | – | 2.0 | – | – | – | – | −2.0 | – | FLX930 | – | – | SUP705 | 53.57 | No |
| C11 | CE | 2.0 | – | 2.0 | 7.0 | 5.0 | −2.0 | +1.0 | FLX930 | RGD875 | FLX930 | SUP705 | 47.06 | No |
| C12 | CF | 2.0 | – | 2.0 | 5.0 | 3.0 | −2.0 | – | FLX930 | – | FLX930 | SUP705 | 14.15 | Yes |
| C13 | CF | 2.0 | – | 1.0 | 4.0 | 3.0 | −1.5 | – | FLX930 | – | FLX930 | SUP705 | 27.71 | Yes |
| C14 | CF | 2.0 | – | 0.5 | 3.5 | 3.0 | −1.25 | – | FLX930 | – | FLX930 | SUP705 | 36.14 | Yes |
| C15 | CF | 2.0 | – | 0.5 | 1.5 | 1.0 | −1.25 | – | FLX930 | – | FLX930 | SUP705 | 25.27 | Yes |
| B01 | – | – | – | – | – | – | – | – | – | RGD810 | – | – | – | No |
| F04 | CF | 2.0 | – | 0.5 | 2.5 | 2.0 | −2.25 | +0.25 | FLX980 | RGD875 | FLX980 | SUP705 | 41.03 | No |
| F06 | CF | 2.0 | 1.0 | 0.5 | 2.5 | 2.0 | −1.25 | +1.25 | FLX930 | RGD875 | FLX930 | SUP705 | 48.08 | No |
| F07 | CF | 2.0 | – | 0.5 | 1.5 | 1.0 | −1.25 | −0.75 | FLX930 | RGD875 | FLX930 | SUP705 | 42.31 | No |
| F10 | CF | 2.0 | – | 0.5 | 2.0 | 1.5 | −0.25 | +0.25 | FLX930 | RGD875 | FLX930 | SUP705 | 51.92 | No |
| F12 | CF | 2.0 | 1.0 | 0.5 | 2.0 | 1.5 | −1.25 | +0.25 | FLX930 | RGD875 | FLX930 | SUP705 | 44.23 | No |
| F13 | CF | 1.5 | 1.0 | 0.5 | 2.0 | 1.5 | −0.75 | +0.25 | FLX930 | RGD875 | FLX930 | SUP705 | 47.17 | No |
| F14 | CF | 1.5 | 1.0 | 0.5 | 1.5 | 1.0 | −0.75 | +0.25 | FLX930 | RGD875 | FLX930 | SUP705 | 52.73 | Yes |
| F15 | CF | 1.5 | 1.0 | 0.5 | 2.0 | 1.5 | −0.75 | +0.25 | FLX930 | RGD875 | FLX930 | SUP705 | 47.17 | Yes |
| F16 | CF | 1.5 | 1.0 | 0.5 | 2.5 | 2.0 | −0.75 | +0.25 | FLX930 | RGD875 | FLX930 | SUP705 | 48.08 | Yes |
| F17 | CF | 1.5 | 1.0 | 0.5 | 3.0 | 2.5 | −0.75 | +0.25 | FLX930 | RGD875 | FLX930 | SUP705 | 50.0 | Yes |
| F18 | CF | 1.5 | 1.0 | 0.5 | 3.5 | 3.0 | −0.75 | +0.25 | FLX930 | RGD875 | FLX930 | SUP705 | 50.98 | Yes |
CE, cube edge; CF, cube face; SUP, support material.