Table 6.

Mechanical properties and surface roughness of additively manufactured Ti-6Al-4V. All values given as reported in reference.

Ref.	Processing	Maximum Stress Applied (MPa)	Stress Amplitude (MPa)	R	Frequency (Hz)	Ult. Tensile Strength (MPa)	Stress Amplitude/Ult. Tensile Strength	Roughness, Ra (μm)
[55]	EBM	150	67.5	0.1	150	965	7%	27
	SLM	200	90	0.1	150	1096	8%	13
[40]	EBM	340	153	0.1	50	928	16%	-
	SLM	550	247.5	0.1	50	1219	20%	-
[56]	SLM	230	103.5	0.1	60	936	11%	-
[57]	SLM	200	120	−0.2	20	1035	12%	32
[58]	SLM	126	126	0	75	1170	11%	-
[59]	SLM	467	210	0.1	50	1014	21%	13
[41]	SLM	350	350	−1	82	973	36%	-
[60]	EBM	200	90	0.1	20	1005	9%	34
	SLM	500	225	0.1	20	970	23%	2
	SLM	300	135	0.1	20	968	14%	14
[61]	EBM	140	63	0.1	-	833	8%	27.1
	SLM	185	83.25	0.1	-	949	9%	13
Current	SLM	200	90	0.1	5	937	10%	6.00
		450	202.5	0.1	5	946	21%	0.38
		350	157.5	0.1	5	963	16%	1.27
		40	18	0.1	5	194	9%	6.40
		40	18	0.1	5	195	9%	2.18
		133	59.85	0.1	5	661	9%	6.26
		165	74.25	0.1	5	694	11%	2.93