Table 1.
Olfactometer parts list
| Olfactometer component | Part | Supplier (cat. #) | Qty. per olfactometer |
|---|---|---|---|
| Flow control housinga | Solenoid valve | Clippard (EW-2M-24-L) | 12 |
| Valve manifold | Clippard (15482-12) | 1 | |
| Barbed connector | Clippard (CT2) | 12 | |
| Solenoid valve driver | Mouser Electronics (998-MIC2981/82YN) | 2 | |
| Terminal board | Winford Engineering (DTA3520-DIN) | 2 | |
| DAQ device | National Instruments (782604-01) | 1 | |
| 24 V power supply | Jameco Electronics (1940547) | 1 | |
| Flow meter | Aalborg (PMR1-012676) | 1 | |
| Pressure regulator | Clippard (MAR-1–2) | 1 | |
| Pressure sensor display | Keyence (AP-34KP) | 1 | |
| Connections | Polyurethane Tubing | Clippard (URH8-0402-02T-050; URH1-0804) | 1 |
| Delivery arm base | Base | custom-machined, aluminumb | 1 |
| Base magnets | K&J Magnetics, Inc. (D42) | 3 | |
| Barbed connector | Clippard (CT2) | 24 | |
| Carrier stream tube | McMaster-Carr (45375K734), custom-machinedb | 1 | |
| Carrier stream tube set screw | McMaster-Carr (92311A431) | 1 | |
| Carrier stream tube connector | Cole-Parmer (EW-06381-82) | 1 | |
| Articulating dial gage holder | Noga (e.g., MA61003) | 1 | |
| Eductor (optional) | United States Plastic Corp. (62472) | 1 | |
| Delivery arm barrel (multiple [×] recommended) | Barrel | Custom-machined, aluminumb | × |
| Barrel magnets | K&J Magnetics, Inc. (D42) | 3× | |
| Odorant reservoir fastener | Digi-Key Electronics (RPC1280-ND) | 12× | |
| Fastener screws | McMaster-Carr (91099A104) | 12× | |
| Disposables (1 per odorant tested) | Odorant reservoir | McMaster-Carr (74695A951) | — |
| Odorant reservoir tip | Henry Schein (3124396) | — |
aSuggested wiring diagram and example National Instruments LabVIEW code available on request.
bComputer-aided design files available on request.