Skip to main content
. 2018 Feb 28;10(3):247. doi: 10.3390/polym10030247

Figure 4.

Figure 4

Failure mode changes with water immersion [8]; specimens prepared by wet layup procedure on grinded surfaces (GR) or without mechanical surface treatment (OGR). Reprinted from Composites Part B, 87, Maljaee H., Ghiassi B., Lourenço P.B., Oliveira D.V., Moisture-induced degradation of interfacial bond in FRP-strengthened masonry, 47–58, Copyright (2015), with permission from Elsevier.