Table 1.

Operative injection molding conditions (T_melt = melt temperature; T_mold = mold temperature; P_holding = holding pressure; T_level = temperature reached on the cavity surface thanks to the activation of the heating device).

Test	Tmelt [°C]	Tmold [°C]	Pholding [MPa]	Holding time [s]	Tlevel [°C]	Heating time [s]
CIM	220	28	26	2	28	0
80-07	220	28	26	2	80	0.7
120-07	220	28	26	2	120	0.7
160-07	220	28	26	2	160	0.7
80-18	220	28	26	2	80	18
120-18	220	28	26	2	120	18
140-18	220	28	26	2	140	18
160-18	220	28	26	2	160	18