Skip to main content
. 2018 Mar 15;10(3):322. doi: 10.3390/polym10030322

Table 2.

Roughness of the steel layer and of the molded samples CIM and 160-18 at 20 mm distance from the gate.

Test Filter 5 mm 20 mm 55 mm
Steel layer flattened 164 ± 30 nm
0.1 µm−1 64 ± 10 nm
0.2 µm−1 25 ± 5 nm
CIM flattened 113 ± 25 nm 139 ± 10 nm 116 ± 10 nm
0.1 µm−1 48 ± 3 nm 38 ± 5 nm 48 ± 3 nm
0.2 µm−1 26 ± 3 nm 20 ± 2 nm 25 ± 2 nm
160-18 flattened 77 ± 5 nm 136 ± 15 nm 106 ± 12 nm
0.1 µm−1 25 ± 5 nm 40 ± 6 nm 24 ± 2 nm
0.2 µm−1 23 ± 5 nm 27 ± 3 nm 23 ± 2 nm