Figure - PMC

Skip to main content

An official website of the United States government

Here's how you know

Here's how you know

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

View full-text article in PMC

. 2018 Feb 11;10(2):176. doi: 10.3390/polym10020176

Search in PMC
Search in PubMed
View in NLM Catalog
Add to search

© 2018 by the authors.

Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).

PMC Copyright notice

Effect of the weight ratio of peptides and PAE resin on lap shear strength of plywood specimens bonded with the peptides-PAE adhesive. The components of the adhesive system were reacted for 120 min, and the plywood specimens were hot pressed at 120 °C and 3.5 MPa for five minutes. Error bars are the standard deviation of six plywood specimen measurements. Specimens that delaminated when soaked in water are indicated (DL). Means that do not share a letter are significantly different (Tukey, 95% confidence level). The minimum shear strength requirements as specified by ASTM D4690 are shown: 2.344 MPa for dry shear strength; 1.93 M. Figure adopted with copyright permission from MDPI (for Adhikari et al., 2016).