Skip to main content
. 2019 Feb 20;234(4):523–531. doi: 10.1111/joa.12941

Figure 1.

Figure 1

Enhanced dome with twist open cap. The dome was manufactured using Viper SI from 3D Systems, designed using SolidWorks. (A) Side view of the perforated dome model is shown (there are 15 holes, diameter = 1.02 mm) and (B) non‐perforated dome model. (C) Top view of the dome showing where materials and skin substitutes could be delivered (diameter of dome = 8 mm). (D,E) The perforated dome cap is shown (six holes, diameter = 1.02 mm).