Table 4.

Test results for cutting forces measurements F_c, F_f, F_p.

Number	A	B	C	f (mm/rev)	ap (mm)	vc (m/min)	S/N Fc	Fc_mean (N)	S/N Ff	Ff_mean (N)	S/N Fp	Fp_mean (N)
1.	1	1	1	0.077	0.25	40	−34.4	52.5	−34.4	52.5	−34.4	52.5
2.	1	2	1	0.077	0.50	40	−39.4	92.7	−35.9	62.4	−35.9	62.4
3.	1	3	2	0.077	0.75	80	−43.0	141.5	−35.7	61.1	−35.7	61.1
4.	1	4	2	0.077	1.00	80	−45.1	180.2	−35.6	59.8	−35.6	59.8
5.	2	1	1	0.115	0.25	40	−36.7	68.5	−35.5	59.6	−35.5	59.6
6.	2	2	1	0.115	0.50	40	−41.6	119.9	−32.8	43.4	−32.8	43.4
7.	2	3	2	0.115	0.75	80	−45.8	193.6	−37.7	76.1	−37.7	76.1
8.	2	4	2	0.115	1.00	80	−47.9	248.5	−37.4	74.2	−37.4	74.2
9.	3	1	2	0.153	0.25	80	−38.9	88.1	−37.0	71.1	−37.0	71.1
10.	3	2	2	0.153	0.50	80	−44.7	171.5	−38.7	86.0	−38.7	86.0
11.	3	3	1	0.153	0.75	40	−47.3	231.5	−38.3	81.8	−38.3	81.8
12.	3	4	1	0.153	1.00	40	−49.5	299.0	−38.5	84.1	−38.5	84.1
13.	4	1	2	0.211	0.25	80	−40.9	110.3	−37.2	72.6	−37.2	72.6
14.	4	2	2	0.211	0.50	80	−46.7	216.2	−39.9	99.2	−39.9	99.2
15.	4	3	1	0.211	0.75	40	−50.6	338.3	−40.2	102.3	−40.2	102.3
16.	4	4	1	0.211	1.00	40	−52.4	417.6	−41.1	113.3	−41.1	113.3