Table 1.
Hardware specifications 1 of the Pry-CamTM.
| Sensor | |
| Type: | Electromagnetic, based on a patented Ultra Wide Band antenna, also providing AC synch signal |
| Bandwidth: | 0.5–100 MHz |
| PD sensitivity: | Down to 1 pC |
| Synch sensitivity: | Down to about 150 VAC (at 10 cm) |
| Synch frequency: | From 10 Hz to 1 KHz |
| Acquisition Unit | |
| Sampling frequency: | 200 MS/s |
| Bandwidth: | 100 MHz |
| Gain: | From 0 dB to 40 dB |
| Trigger: | Digital, fully configurable |
| Synch resolution: | 16 bit (5 μs) |
| Timestamp resolution: | 5 ns |
| Processing: | Real-time filtering, high-speed pattern only, TDR |
| Repetition Rate | |
| Full pulse waveform: | Ethernet >10,000 pps, WiFi: >3,000-6,000 pps |
| Pattern only: | Ethernet >50,000 pps, WiFi: >10,000 pps |
| Interfaces: | Wireless 802.11 b/g (WiFi), Optical Fiber Ethernet (100-Base FX, optional) |
| Remote Synch: | Wireless RF interface @ 868 MHz |
| Working mode: | Local, remote and monitoring |
| Power supply: | 12 V, 200 mA |
| Backup battery: | Li-Po 7.4 V, 2200 mAh |
| Autonomy in battery mode: | About 5 h |
| Weight: | About 400 g (depending on options) |
| Working temperature: | From −25 °C to 70 °C |
| Dimensions: | 160 mm × 120 mm × 130 mm (LxWxH) |
| Case: | Rugged ABS plastic with IP67 protection rating |
1 this data are extracted from a technical document of Prysmian Electronics s.r.l..