Table 1.
The sizes and the defect settings of the specimens.
| Specimens Number | Sleeve Type | Sleeve Inside/ Outside Diameter (mm) |
Specimens Size (mm) |
GSS Connector Location | Grouted Defect Width (mm) |
|---|---|---|---|---|---|
| SJ11 | GT22 | 42.5/54 | 200 × 300 × 380 | Centered | 0 |
| SJ12 | 27 | ||||
| SJ13 | 32 | ||||
| SJ14 | 37 | ||||
| SJ15 | 42.5 | ||||
| SJ21 | GT25 | 46.5/58 | 200 × 300 × 425 | Centered | 0 |
| SJ22 | 30 | ||||
| SJ23 | 35 | ||||
| SJ24 | 40 | ||||
| SJ25 | 46.5 | ||||
| SJ31 | GT25 | 46.5/58 | 200 × 300 × 425 | Centered and two rebars | 0 |
| SJ32 | 30 | ||||
| SJ33 | 35 | ||||
| SJ34 | 40 | ||||
| SJ35 | 46.5 | ||||
| SJ41 | GT25 | 46.5/58 | 200 × 300 × 425 | Offset and one rebar | 0 |
| SJ42 | 30 | ||||
| SJ43 | 35 | ||||
| SJ44 | 40 | ||||
| SJ45 | 46.5 |