Skip to main content
. 2019 May 6;9:6938. doi: 10.1038/s41598-019-43404-2

Figure 3.

Figure 3

Experimental verification of the Hyperdyne method. Using an arbitrary waveform generator (AWG), the simulated magnetic field (Nm = 1000) was applied on a single NV center by a current carrying wire, with the setup of ref.25. Taking a Fourier transform of the summed photon counts, the Mz, diffusion independent signal can be clearly seen, producing a peak with 170 Hz linewidth (limited only by the 5.6 ms length of the simulated signal). A simulated signal with only statistical polarization produces no peak, and the diffusion limited signal would be over 10 kHz.