Table 6.
Polymer materials used for the classification study.
| No. | Polymer Type | No. | Polymer Type |
|---|---|---|---|
| 1 | PolyStyrene-General Purpose | 24 | Polyethylene-High Density |
| 2 | PolyStyrene-High Impact | 25 | Polypropylene-Copolymer |
| 3 | Styrene-Acrylonitrile (SAN) | 26 | Polypropylene-Homopolymer |
| 4 | ABS-Transparent | 27 | Polyaryl-Ether |
| 5 | ABS-Medium Impact | 28 | Polyvinyl Chloride-Flexible |
| 6 | ABS-High Impact | 29 | Polyvinyl Chloride-Rigid |
| 7 | Styrene Butadiene | 30 | Acetal Resin-Homopolymer |
| 8 | Acrylic | 31 | Acetal Resin-Copolymer |
| 9 | Modified Acrylic | 32 | Polyphenylene Sulfide |
| 10 | Cellulose Acetate | 33 | Ethylene Vinyl Acetate |
| 11 | Cellulose Acetate Butyrate | 34 | Urethane Elastomer (Polyether) |
| 12 | Cellulose Acetate Propionate | 35 | Polypropylene-Flame Retardant |
| 13 | Nylon-Transparent | 36 | Polyester Elastomer |
| 14 | Nylon-Type 66 | 37 | ABS-Flame Retardant |
| 15 | Nylon-Type 6 (Homopolymer) | 38 | Polyallomer |
| 16 | Thermoplastic Polyester (PBT) | 39 | Styrenic Terpolymer |
| 17 | Thermoplastic Polyester (PETG) | 40 | Polymethyl Pentene |
| 18 | Phenylene Oxide | 41 | Talc-Reinforced Polypropylene |
| 19 | Polycarbonate | 42 | Calcium Carbonate-Reinforced Polypropylene |
| 20 | Polysulfone | 43 | Nylon (Type 66–33% Glass) |
| 21 | Polybutylene | 44 | Thermoplastic Rubber |
| 22 | Ionomer | 45 | Polyethylene (Medium Density) |
| 23 | Polyethylene-Low Density | 46 | ABS-Nylon Alloy |