Skip to main content
. Author manuscript; available in PMC: 2020 Feb 28.
Published in final edited form as: Anal Methods. 2019 Jan 29;11(8):1064–1072. doi: 10.1039/C8AY02672F

Figure 1.

Figure 1

A.) CAD design of the 3D printed culture device. The device is printed together as an assembly of 2 parts consisting of the bottom portion with slots for the inserts tapered to a funnel and the top portion with threads to accommodate commercial fittings. B.) Picture showing the printed device. A pin is epoxied to the end of the device for simple integration with analysis devices. C.) The inserts made up of PS fibers electrospun onto PS sheets. The sheets are then laser cut into individual inserts securing the fibers to the sheet. D.) Cross-sectional view of the slots for the inserts to fit in. E.) Cross-sectional view with the inserts inside the housing.