Table 3.

P-value of tested materials with different mechanical properties.

Materials		P-value
		Izod impact strength	Tensile strength	Young’s modulus	Bending deflection
PEEK-milled	PEEK-pressed (100 °C)	0.004	<0.001	0.003	<0.001
	PEEK-pressed (150 °C)	>0.05	<0.001	≤0.001	<0.001
	PEEK-pressed (175 °C)	0.034	<0.001	<0.001	<0.001
	PEEK-pressed (200 °C)	>0.05	<0.001	0.003	<0.001
	PMMA-HC	0.005	<0.001	<0.001	≤0.001
	PMMA-pressed	0.004	<0.001	<0.001	<0.001
PEEK-pressed (100 °C)	PEEK-pressed (150 °C)	0.015	0.018	>0.05	>0.05
	PEEK-pressed (175 °C)	>0.05	>0.05	>0.05	>0.05
	PEEK-pressed (200 °C)	0.002	0.013	>0.05	>0.05
	PMMA-HC	<0.001	<0.001	<0.001	<0.001
	PMMA-pressed	<0.001	<0.001	<0.001	<0.001
PEEK-pressed (150 °C)	PEEK-pressed (175 °C)	>0.05	>0.05	>0.05	>0.05
	PEEK-pressed (200 °C)	>0.05	>0.05	>0.05	0.010
	PMMA-HC	<0.001	<0.001	<0.001	<0.001
	PMMA-pressed	<0.001	<0.001	<0.001	<0.001
PEEK-pressed (175 °C)	PEEK-pressed (200 °C)	>0.05	>0.05	>0.05	0.025
	PMMA-HC	<0.001	<0.001	<0.001	<0.001
	PMMA-pressed	<0.001	<0.001	<0.001	<0.001
PEEK-pressed (200 °C)	PMMA-HC	<0.001	<0.001	<0.001	<0.001
	PMMA-pressed	<0.001	<0.001	<0.001	<0.001
PMMA-HC	PMMA-pressed	>0.05	>0.05	>0.05	>0.05

PEEK: PolyEtherEtherKetone.

PMMA: Polymethylmethacrylate.

HC: Heat-cured.