Table 1.
Electrodes | Methods | Linear Ranges (μM) | Detection Limit (μM) | Ref. | ||||
---|---|---|---|---|---|---|---|---|
AA | DA | AC | AA | DA | AC | |||
GO-XDA-Mn2O3/GCE | Chronoamperometric | 10–8000 | - | 1–1000 | 0.6 | - | 0.056 | [29] |
MWCNT/GO/AuNR/GCE | DPV | 1–8000 | - | - | 0.087 | - | - | [24] |
GO-ZIF67/GCE | DPV | - | 0.2–80 | - | - | 0.05 | - | [28] |
p-GLY/GO/GCE | DPV | - | 0.2–62 | - | - | 0.011 | - | [31] |
AgNPs/P(Arg)-GO/GCE | DPV | 4–2400 (only change CAA) |
0.05–50 (only change CDA) |
- | 0.984 | 0.01 | - | [30] |
Cu2O/GR/GCE | DPV | - | - | 0.02-1.3 | - | - | 0.0067 | [42] |
CuZEA/RGO/GCE | DPV | 20–200 (only change CAA) |
0.1–19 (only change CDA) |
- | 11 | 0.041 | - | [43] |
Zn-NiAl LDH/rGO/GCE | DPV | 0.5–11 | 0.001–1 | - | 0.0135 | 0.0001 | - | [44] |
3D-MoS2/rGO/Au/GCE | DPV | 2–5400 | 0.3–198.3 | - | 1.46 | 0.15 | - | [23] |
RGO-CdSe QD/GCE | DPV | 390–1000 (only change CAA) |
4.9–74 (only change CDA) |
- | 66 | 0.11 | - | [45] |
Fc-S-Au/C NC/graphene/GCE | DPV | 8–400 | 0.2–2.5 | 0.5–46 | 1.0 | 0.05 | 0.1 | [17] |
Cu2+@PDA-MWCNTs/GCE | DPV | 5–175 | 4–125 | 5–75 | 0.82 | 0.45 | 0.87 | [46] |
Fe3O4@Au-S-Fc/GS-chitosan/GCE | DPV | 6–350 | 0.5–50 | 0.4–32 | 1.0 | 0.1 | 0.05 | [16] |
PSNSB/CPE | DPV | 2.5–1050 | 0.05–120 | 0.033–158 | 0.02 | 0.002 | 0.005 | [22] |
Au/ZnO/N-doped graphene/GCE | DPV | 30–13,000 (only change CAA) |
2–180 (only change CDA) |
5–3100 (only change CAC) |
5.0 | 0.4 | 0.8 | [1] |
Cu NWs/GO/GCE | DPV | 1–60 | 1–100 | 1–100 | 0.05 | 0.41 | 0.04 | this work |