Table 1 –
ROI | Stimulus configuration | ||||
---|---|---|---|---|---|
Disk | Inner ring | Outer ring | Periph | Pinwheel | |
Centerl | 0.55 ± 0.06 | 0.04 ± 0.04 | 0.02 ± 0.04 | −0.10 ± 0.04 | 0.54 ± 0.04 |
−0.30 ± 0.07 | 0.02 ± 0.04 | −0.01 ± 0.06 | 0.14± 0.07 | −0.19 ± 0.09 | |
0.11 ± 0.04 | 0.02 ± 0.06 | 0.45 ± 0.12 | −0.04 ± 0.06 | −0.42 ± 0.07 | |
Center2 | 0.83 ± 0.08 | 0.60 ± 0.07 | 0.06 ± 0.05 | −0.06 ± 0.04 | 0.73 ± 0.09 |
−0.06 ± 0.09 | −0.23± 0.05 | 0.23 ± 0.07 | 0.21 ± 0.08 | 0.56 ± 0.19 | |
−0.04 ± 0.18 | 0.10 ± 0.12 | 0.34 ± 0.52 | −0.17 ± 0.10 | −0.65 ± 0.18 | |
Edge | 0.75 ± 0.18 | 0.53 ± 0.15 | 0.89 ± 0.16 | 1.02 ± 0.25 | 0.95 ± 0.19 |
−0.23 ± 0.53 | −0.16± 0.08 | 0.09 ± 0.14 | −0.02 ± 0.12 | 0.12 ± 0.24 | |
−0.06 ± 0.13 | 0.13 ± 0.15 | 0.63 ± 0.20 | −0.12 ± 0.13 | −0.44± 0.18 | |
Periphl | −0.30 ± 0.13 | −0.12± 0.05 | 1.06 ± 0.08 | 1.56 ± 0.13 | 0.79 ± 0.07 |
0.29 ± 0.09 | 0.23 ± 0.04 | 0.14 ± 0.06 | −0.12 ± 0.06 | 0.48 ± 0.13 | |
−0.20 ± 0.06 | 0.22 ± 0.05 | 0.55 ± 0.09 | −0.20 ± 0.07 | −0.46 ± 0.08 | |
Periph2 | −0.27 ± 0.03 | −0.20± 0.03 | 0.02 ± 0.04 | 0.83 ± 0.11 | −0.13 ± 0.06 |
0.37 ± 0.06 | 0.16 ± 0.03 | 0.30 ± 0.04 | 0.02 ± 0.03 | 0.53 ± 0.07 | |
−0.06 ± 0.04 | 0.09 ± 0.04 | 0.39 ± 0.06 | −0.06 ± 0.03 | −0.20 ± 0.05 | |
V1 | 0.25 ± 0.04 | 0.17 ± 0.03 | 0.41 ± 0.04 | 0.72 ± 0.06 | 0.56 ± 0.05 |
0.10 ± 0.04 | 0.01 ± 0.02 | 0.18 ± 0.03 | 0.04 ± 0.03 | 0.41 ± 0.07 | |
−0.08 ± 0.06 | 0.12 ± 0.04 | 0.44 ± 0.05 | −0.12 ± 0.04 | −0.43 ± 0.06 |
Each panel specifies the weights of three ICs for the corresponding case in the example data of Fig. 5, with standard errors of the mean weights, given for all combinations of stimulation regions and ROI projection regions. The weights are scaled in percent BOLD units.