Skip to main content
. Author manuscript; available in PMC: 2019 Aug 19.
Published in final edited form as: Adv Biosyst. 2019 May 8;3(7):1800307. doi: 10.1002/adbi.201800307

Figure 2.

Figure 2

Manufacturing procedure used to generate open microdevices. PDMS was poured and spread onto a silicon wafer. After curing, the PDMS replica was peeled off from the silicon wafer, cut into a smaller 3x3 (or 2x3) platform format, and plasma bonded to a glass substrate. NOA-73 drops of ca. 150-200μm diameter were added to the central compartment in register with microchannels four and nine, and cured with UV light.