Skip to main content
. 2019 Aug 17;6(Pt 5):927–937. doi: 10.1107/S205225251900914X

Table 1. Chip-scanning parameters for 1 kHz fixed-target data collection with the Roadrunner II goniometer.

All chips were scanned with a horizontal scanning speed of 100 mm s−1.

Chip name lys08 lys09 lys10 lys11 lys12 lys13 lys14 lys15 protK3 protK4
Exposure time (µs) 5 5 5 1 1 1 1 1 1 1
No. of horizontal scan points 331 331 331 333 331 151 163 156 310 156
No. of vertical scan points 116 105 104 116 105 24 116 105 114 105
Total no. of scan points 38396 34752 34423 38628 34754 3580 18907 16365 35340 16379
No. of hits 12209 12512 7489 5376 4621 937 4707 3443 2538 640
No. of indexed and merged hits 9238 8813 6293 4448 3885 762 3386 2312 1366 219
Total scanning time (s) 158 143 142 158 143 28 139 125 153 125
Hits per second 77 87 53 34 32 33 34 28 17 5.1
Indexed patterns per second 58 62 44 28 27 27 24 18 8.9 1.8
Effective scanning rate (frames s−1) 243 243 243 244 243 130 137 131 231 132

15 scan points at the beginning and end of every line were used for acceleration and deceleration of the linear axis, so the total horizontal scanning range slightly exceeds the chip lengths.

These chips were only partially scanned.