Table 5.

Additive manufacturing (AM) materials for bone prostheses.

Material	Binder	Layer Thickness	References
TCP	Aqueous based	20 µm	[93]
HA	-	100 µm	[116]
$\alpha /\beta$-TCP modified with 5 wt% hydroxypropymethylcellulose	Water	100 µm	[117]
$\mathsf{\beta }$-TCP, Si${\mathrm{O}}_2$-ZnO-dope $\mathsf{\beta }$-TCP	Water based binder	20 µm (β-TCP) 30 µm (SiO2-ZnO-doped β-TCP)	[118]
HA	$\alpha$-n-butyl cyanoacrylate (NBCA)	-	[119]
TCP	20% (v/v) phosphoric acid	125 µm	[120]
TTCP/$\beta$-TCP	25% citric acid	100 µm	[121]
$\alpha$-TCP	10 wt.% phosphoric acid	50 µm	[122]
HA/Maltrodextrin	Water based	175 µm	[123]
HA & Maltrodextrin/apatite-wollastonite glass	Water based	100 µm	[124]