Table 2.
Print parameter conditions for various ratios of bio-ink.
| - | GR: 0% | GR: 0.024% | GR: 0.06% & 0.1% |
|---|---|---|---|
| Nozzle temperature (°C) | 14 | 18 | 18 |
| Platform temperature (°C) | 2 | 2 | 2 |
| Print speed (mm/s) | 2 | 4 | 4 |
| Probe stress | From 0.08 MPa, each increase of 0.02 MPa gradually increases | From 0.05 MPa, each increase of 0.01 MPa gradually increases | From 0.05 MPa, each increase of 0.01 MPa gradually increases |
| Print thick (mm) | 0.2 | 0.2 | 0.2 |
| Print height (mm) | 2 | 2 | 2 |
| Print layer | 10 | 10 | 10 |
| Filling distance (mm) | 0.6–0.8 | 0.6–0.8 | 0.6–0.8 |
| Probe type | 0.21 mm needle | 0.21 mm tapered | 0.21 mm tapered |