Evaluation of free and total fluoride concentration in mouthwashes via measurement with ion-selective electrode

Abstract

Background

The aim of this study was to compare free fluoride concentration and total fluoride concentration in mouthwashes.

Methods

Fluorine-containing mouthwashes from various companies and manufacturers (Colgate Total Plax Classic Mint®, Colgate-Palmolive, New York, USA; Colgate Total Plax Gentle Mint®, Colgate-Palmolive, New York, USA; Colgate Total Plax Fresh Mint®, Colgate-Palmolive, New York, USA; Oral B Advantage®, Procter&Gamble, Cincinnati, USA; Reach Fresh Mint®, Johnson&Johnson, New Brunswick, USA; Foramen®, Laboratorios Foramen, Guarnizo, Spain; Lacalut Sensitive®, Dr. THEISS, Homburg, Germany; Sensodyne®, GlaxoSmithKline, London, UK; Vesna F®, Vita, Saint Petersburg, Russia; Lacalut Fresh®, Dr. THEISS, Homburg, Germany) were selected as study objects. Fluoride measurements were carried out using the fluoride selective electrode.

Results

Free fluoride:total fluoride ratio was more than 80% for six samples (Colgate Total Plax Gentle Mint® - 88%, Colgate Total Plax Fresh Mint® - 99%, Oral B Advantage® - 92%, Reach Fresh Mint® - 92 and 89% for the mouthwash of another batch, Lacalut Sensitive® - 94%) and less than 63% for three samples (Colgate Total Plax Classic Mint® - 56%, Foramen® - 62%, Vesna F® - 61%). Two samples had more than 70% and less than 80% of unbound fluoride, respectively (Sensodyne® - 77%, another batch of Oral B Advantage® mouthwash - 74%). Rinse containing sodium monofluorophosphate (Na₂PO₃F) (Vesna F®) had more than 50% of free fluoride, while the rinse containing amine fluoride (AmF) (Lacalut Sensitive®) had 94%. The difference in the free fluoride:total fluoride ratio can be explained by binding of fluoride ions by components contained in mouthwashes, such as coloring agents and polymeric compounds. The lowest concentration of free fluoride ions (0.000093 mol/L) was observed for aluminum fluoride (AlF₃) rinse (Lacalut Fresh®), while the total fluoride amount was not determined due to possible generation of strong fluoride complexes. This implies that fluoride ions will not be uptaken by tooth tissue and may even be washed away from it, compromising the efficacy of mouthwashes.

Conclusions

The differences in free fluoride: total fluoride ratio between analyzed mouthwashes reveal a need to develop a method for evaluation of free fluorides in mouthwashes for proper updating of national and international guidelines.

Background

According to the World Health Organization, dental caries is a disease prevalent among 60–90% of school-age children and almost 100% of adults worldwide [1]. There are numerous reports regarding the influence of comprehensive prevention programs on the prevalence of caries, including topical fluoridation provided by the application of fluoride-containing toothpastes, mouthwashes, gels, foams, and varnishes [2–8].

In addition to the fluorides, other inorganic elements are essential to mineralize hard tooth tissues and increase their resistance to caries. Toothpastes and mouthwashes containing sodium phosphate, calcium glycerophosphate, and zinc oxide exhibit a pronounced anticaries action [9–11].

Mouthwashes are additional products for oral hygiene. Most of the currently available mouthwashes can be divided into four groups, depending on their therapeutic action: (1) mouthwashes reducing oral malodor; (2) mouthwashes decreasing dental plaque formation due to antibacterial action; (3) mouthwashes containing various concentrations of fluorine compounds and able to affect the mineralization of dental hard tissue; and (4) mouthwashes preventing or reducing gingivitis [12–17].

Various fluorine and phosphorus compounds are included as active components in the mouthwashes of the second and the third groups. Basic organic and inorganic fluorine compounds, contained in products for prophylaxis of oral cavity diseases, are sodium fluoride (NaF), sodium monofluorophosphate (Na₂PO₃F), amine fluoride (AmF), aluminum fluoride (AlF₃), and stannous fluoride (SnF₂) [18, 19]. The active mineral supplements could be phosphate salts, for instance, nano-sized sodium hexametaphosphate and sodium trimetaphosphate, which are capable of changing the solubility of enamel after adsorption on its surface [20, 21].

Mouthwashes containing fluorine compounds are divided into groups, depending on fluoride ion concentration: 0.05% sodium fluoride solutions can be used daily; and 0.2% sodium fluoride solutions are recommended for weekly or fortnightly application [22].

Rošin-Grget et al. reviewed various theories of the cariostatic action of fluorine. According to one of these theories, fluoride ions penetrate into the lattice of hydroxyapatite, Ca₁₀(PO₄)₆(OH)₂, resulting in the formation of fluorohydroxyapatite, Ca₁₀(PO₄)₆(OH) F, which is more resistant to acids [23].

According to another theory, during the exposure of the tooth surface to NaF, the reaction with hydroxyapatite results in the formation of poorly soluble crystals of calcium fluoride [23]:

$${\mathrm{Ca}}_{10}{\left({\mathrm{PO}}_4\right)}_6{\left(\mathrm{OH}\right)}_2+20\mathrm{NaF}\to 10{\mathrm{CaF}}_2\downarrow +{\text{6Na}}_3{\mathrm{PO}}_4+\text{2NaOH}$$

It should be noted that the equilibrium shift in both chemical processes is determined by the activity of fluoride ions in the oral fluid, which in turn depends on the concentration of free fluoride ions in the applied prophylactic and therapeutic preparations. Various ingredients of mouthwashes, such as colourants, flavouring agents, sweeteners, preservatives, and surfactants, can chemically bind fluoride ions. Such bound fluoride is not effective in preventing and reducing dental caries. Thus, the control and the determination of «active» fluoride can determine the quality and, hence, the therapeutic efficacy of mouthwashes.

Fluorine-containing mouthwashes currently used in dental practice can be divided into three types: (1) therapeutic mouthwashes that can be purchased over-the-counter or prescribed only under the supervision of a doctor; (2) cosmetic mouthwashes mainly aimed at freshening breath; and (3) mouthwashes that are a combination of these two types [24].

Since the first type consists of therapeutic agents, the content of biologically active compounds is controlled by the corresponding normative and technical documentation and by appropriate methods of quantitative analysis of total fluoride.

The quality of the second type of preparations is in many cases determined only by the technical specifications in manufacturing and may not provide for the quantitative determination of the active substances in the final product.

The aim of this study was to compare active-fluoride and total-fluoride concentrations in 10 mouthwashes commercially available in Russian Federation.

Methods

Fluoride products

Fluorine-containing mouthwashes were purchased from local markets of Moscow (Russian Federation) and selected as study objects (Table 1). Colgate Total Plax Classic Mint® (0.025% NaF), Colgate Total Plax Gentle Mint® (0.025% NaF), and Colgate Total Plax Fresh Mint® (0.025% NaF) are produced by Colgate-Palmolive (New York, USA). Each of the products exhibits antibacterial activity and prevents dental plaque formation and oral malodor. Procter&Gamble (Cincinnati, USA) produces Oral B Advantage® (0.05% NaF) mouthwashes aimed at providing tooth and gum care. The company producing Reach Fresh Mint® is Johnson&Johnson (New Brunswick, USA). In addition to NaF (the content was not declared), Reach Fresh Mint® contains another active component – cetylpyridinium chloride. Laboratorios Foramen (Guarnizo, Spain) produces Foramen® (0.05% NaF), which strengthens tooth enamel. Dr. THEISS (Homburg, Germany) produces Lacalut Sensitive® (0.33% AmF) and Lacalut Fresh® (0.2% AlF₃). Lacalut Sensitive® decreases sensitivity of teeth to thermal stimuli. Lacalut Fresh® prevents parodontitis due to astringent properties of aluminum lactate. GlaxoSmithKline (London, UK) is manufacturer of Sensodyne® (0.0217% NaF). Sensodyne® also reduces tooth sensitivity. Vita (Saint Petersburg, Russia) produces Vesna F® (0.012% fluorine) mouthwash, which contains Na₂PO₃F and calcium glycerophosphate as active components. These mouthwashes are the most widely represented on Russian market and recommended by dental practitioners for the proper oral care.

Table 1.

Composition of fluoride-containing mouthwashes.

Brand	Composition
	Active ingredients		Et	Glyc	Sorb	Other ingredients
	Fluorides	Phosphates
Colgate Total Plax Classic mint®	NaF	Disodium hydrogen phosphate	+	+	+	Sodium lauryl sulfate, sodium methyl cocoyl taurate, menthol, saccharin, aqua, flavourings, colourants
Colgate Total Plax Gentle mint®	NaF	Disodium hydrogen phosphate	+	+	+	Sodium lauryl sulfate, sodium methyl cocoyl taurate, menthol, saccharin, aqua, flavourings, colourants
Colgate Total Plax Fresh mint®	NaF	Disodium hydrogen phosphate	+	+	+	Sodium lauryl sulfate, sodium methyl cocoyl taurate, menthol, saccharin, aqua, flavouring agents, colourants
Oral B Advantage®	NaF	–	+	+	–	Methylparaben, propylparaben, poloxamer 407, cetylpyridine chloride, sodium saccharin, aqua, flavouring agents, colourants
Reach Fresh mint®	NaF	Disodium hydrogen phosphate, sodium dihydrogen phosphate	+	+	+	copolymer РОЕ, sodium benzoate, polyphenylene oxide, POE (20) sorbitan monooleate, perfume, cetylpyridinium chloride, aqua, colourants
Foramen®	NaF	–	–	+	+	Potassium nitrate, PEG-40, allantoin, flavour additive, sodium methylparaben, sodium propylparaben, lemon acid, sodium benzoate, cetylpyridine chloride, aqua, sodium saccharinate
Lacalut sensitive®	AmF	–	–	+	–	Cocamidopropyl betaine, chlorhexidine bigluconate, aqua, aluminum lactate, propylene glycol, PEG-40, flavouring agent
Sensodyne®	NaF	Disodium hydrogen phosphate, sodium dihydrogen phosphate	–	+	+	Sodium benzoate, poloxamer 338, potassium chloride, PEG-60, aqua, cetylpyridine chloride, sodium saccharinate, sodium chloride, methylparaben, flavoring agent
Vesna F®	Na2PO3F	_	_	_	_	Aqua, xylitol, calcium glycerophosphate, polyoxyethylene sorbitan monooleate, sodium benzoate, citric acid, food flavour, colourants
Lacalut Fresh®	AlF3	_	_	_	_	Aqua, isopropyl alcohol, PEG-40 hydrogenated castor oil, flavors, peppermint extract, aluminum lactate, chlorhexidine bigluconate, sodium saccharinate, allantoin, bisabolol

Et ethanol, Glyc glycerol, Sorb sorbitol

Fluoride measurements

The method of direct potentiometry was used to determine fluoride ion activity using fluoride ion–selective electrode based on lanthanum fluoride. Standard silver chloride electrode was used as a reference electrode. Electromotive force of a galvanic cell was measured by standard laboratory ion meter И160М. The calibration of the electrode was performed every day before fluoride measurements.

To obtain calibration curves, series of NaF standard solutions (5·10^− 1-5·10^− 5 M) were prepared using either deionized water, or Albavit solution, which does not contain fluoride ions and is similar in composition to the test mouthwashes. Calibration curve data is given in Table 2 and Table 3 and in Fig. 1. The accuracy of measurement of fluoride ion concentrations in standard solutions of NaF is shown in Table 4. Similar measurements for NaF solution prepared with Albavit solution are represented in Table 5.

Table 2.

Calibration of ISE in NaF standard aqueous solutions

	Concentration of NaF, mol/L									Average
	0.5	0.1	0.05	0.01	0.005	0.001	0.0005	0.0001	0.00005
рF	0.533	1.119	1.362	2.046	2.320	3.017	3.310	4.000	4.301
EMF	573.0	532.0	524.2	470.0	466.9	409.0	405.5	353.0	338.0
	573.7	531.5	524.7	471.0	467.6	407.6	406.6	350.0	344.4
	572.8	532.3	522.0	471.0	469.2	406.7	408.0	347.6	340.0
		534.4		478.0		410.0		340.0
		536.0		478.0		407.0		345.5
		539.5		473.8		404.0		348.1
X̅	573.2	534.3	523.6	473.6	467.9	407.4	406.7	347.4	340.8
S	0.47	3.03	1.44	3.61	1.18	2.08	1.25	4.40	3.27	2.18
Δ X	0.69	3.18	2.14	3.79	1.75	2.18	1.86	4.62	4.86	2.53
E(%)	0.12	0.60	0.41	0.80	0.37	0.53	0.46	1.33	1.43	0.58

Table 3.

Calibration of ISE in NaF solutions prepared with Albavit solution

pF	0	0.553	0.803	1.119	1.362	1.660	2.046	2.320	2.620	3.017	3.310
EMF (aq.)	594	573		534	520		474	467		420	406
EMF (Alba)			556			505			442

Fig. 1.

Calibration curve representing electrode response to fluoride concentration at T = 298 K

Table 4.

The accuracy of measurement of F⁻ in NaF standard aqueous solutions

NaF / TISAB	EMF	+  10 ml TISAB	V (NaF) added, ml	ΔЕ	с (F−)	%	X̅	S	X	E, %
5 / 5	508.2	490.9	9.2	17.3	0.096	96	95.8	1.92	2.21	2.3
3 / 7	495.6	478.5	4.0	17.1	0.095	95
7 / 3	518.4	498.7	19.2	19.7	0.094	94
3 / 7	497.0	478.8	4.2	18.2	0.099	99
5 / 5	505.0	488.0	9.1	17.0	0.095	95

Table 5.

The accuracy of measurement of F⁻ in NaF standard solutions prepared using Albavit solution (4 ml «Alba» + 1 ml NaF)

c (NaF), mol/L	EMF	+  5 ml TISAB	+  10 ml TISAB	V (NaF) added, ml	с (F−) theoretical	с (F−) actual	c̄ (F−)
0.5	532.2	505.3	486.9	1.0	0.100	0.104	0.105 ± 0.002
0.5	536.7	509.7	490.8	1.0	0.100	0.106
0.5	534.2	507.2	489.8	1.0	0.100	0.105
0.1	501.3	469.5	450.8	1.0	0.020	0.022	0.022 ± 0.0005

To determine total fluoride concentration in mouthwashes, the method of standard addition was applied. Samples of mouthwashes were diluted in total ionic strength adjustment buffer (TISAB), which sets constant ionic strength during measurement and which also precomplexes interfering ions (e.g., aluminium ions Al³⁺). After the measurement of potential of each diluted sample a known amount of standard was added and the measurement was repeated again for further calculation of difference in the potentials and quantification of total fluoride. Since the results of quantitative determination of fluoride ions on standard mixtures prepared with aqueous solution and Albavit solution were slightly differentiated (i.e., the results obtained in the first case were systematically lower compared to those obtained theoretically, whereas in the second case the results were found to be higher), we attempted to modify the procedure by using the method of double increase in concentration without preliminary dilution with TISAB solution in order to determine possible binding of fluoride ions by components contained in the mouthwashes. Every sample of the mouthwash was measured five times and the mean of the measurements was used for further statistical estimation.

Results

Results of fluoride analysis are shown in Table 6. Most of the analyzed mouthwashes contained NaF as a source of fluoride ions; other types of fluoride agents were Na₂PO₃F, AmF, and AlF_3. Free fluoride:total fluoride ratio was more than 80% for six samples (Colgate Total Plax Gentle Mint® - 88%, Colgate Total Plax Fresh Mint® - 99%, Oral B Advantage® - 92%, Reach Fresh Mint® - 92 and 89% for the mouthwash of another batch, Lacalut Sensitive® - 94%) and less than 63% for three samples (Colgate Total Plax Classic Mint® - 56%, Foramen® - 62%, Vesna F® - 61%). Two samples had more than 70% and less than 80% of unbound fluoride, respectively (Sensodyne® - 77%, another batch of Oral B Advantage® mouthwash - 74%). Rinse containing Na₂PO₃F (Vesna F®) had more than 50% of free fluoride, while the rinse containing AmF (Lacalut Sensitive®) had 94%. The lowest concentration of free fluoride ions (0.000093 mol/L) was observed for AlF₃ rinse (Lacalut Fresh®).

Table 6.

The determination of fluoride-ions concentration and activity by the method of standard addition and modified method

Label	pH	Dilution	F−, mol/L × 10−3
			Method of standard addition		Modified method
			c (F−)	a (F−)	c (F−)	a (F−)
Colgate Total Plax Classic mint	7.15	–	9.77	5.52	9.92	5.43
		1÷10	0.75	0.89	1.11	1.06
Colgate Total Plax Gentle mint	5.70	–	9.14	8.05	8.91	8.71
		1÷10	1.22	0.75	1.19	1.20
Colgate Total Plax Fresh mint	5.95	–	9.87	9.81	9.39	8.92
		1÷10	0.63	0.47	0.70	0.43
Oral B Advantage	5.70	–	17.23	15.81	25.91	15.52
		1÷10	1.42	1.21	1.2	0.98
Oral B Advantagea	5.75	–	16.70	12.30	16.81	6.08
Reach Fresh mint	5.80	–	15.86	14.56	24.09	13.71
		1÷10	1.20	0.71	1.40	1.02
Reach Fresh minta	5.75	–	18.15	16.10	26.90	14.20
Foramen	5.80	–	14.62	9.11	20.05	9.05
		1÷10	0.75	0.94	1.20	1.07
Lacalut sensitive	4.40	–	5.48	5.13	8.60	4.20
		1÷10	0.758	0.77	0.15	0.86
Sensodyne	5.70	–	16.25	12.53	23.59	11.12
		1÷10	2.01	1.27	–	–
Vesna F	6.05	–	4.49	2.76	5.20	2.71
Lacalut Fresh	4.20	–	–	0.093	1.30	0.095
		1÷10	–	0.012	0.14	0.012

^a mouthwash of another batch was used

Discussion

The State Standard of Russian Federation Р 51577–2000 specifies only the total amount of fluoride ions in liquid oral hygiene products. We failed to find articles dedicated to the determination of free fluoride concentration in mouthwashes; however, several authorities have been focusing on the studies aimed at free fluoride analysis in toothpaste since 2005 [25–27]. The participants of European Organization for Caries Research Workshop, which was held to discuss the issues related to the methodology for determination of potentially available fluoride in toothpastes, have emphasized the necessity of developing methods measuring fluoride bioavailability [28]. The development of techniques providing the assessment of free fluoride in mouthwashes is also required. Mouthwashes selected for fluoride measurements do not represent all the variety of brands commercially available in Russia, however even the small sample size indicates great discrepancies between the obtained data on fluoride content.

The experiment showed the results to be almost identical for the Colgate Total Plax (Gentle Mint)® and Colgate Total Plax (Fresh Mint)® solutions, with both methods.

Significant differences in concentrations determined by the method of standard addition and by the modified method of quantitative assessment were observed for such solutions as Oral B®, Reach®, and Foramen®. The fact that an increase in total fluoride content was observed with the modified method may be explained by a change in the ionic strength of the solution during the measurement; or by partial binding of fluoride ions by certain components of the mouthwashes; or possibly by polymeric compounds such as poloxamers and polyphenylene oxides. Analogous observations were made for the Sensodyne® solution, which does include polymeric compounds. This assumption is supported by the fact that in standard solutions prepared with Albavit solution containing polymeric compounds, the determined concentration was systematically higher than the theoretical concentration; whereas systematically lower results were obtained with model solutions in the procedure of fluoride ion determination using TISAB solution.

In those preparations lacking polymeric compounds, results of fluoride ion determination were identical at the constant ionic strength and modified method within the error of experiment. To confirm these assumptions, we determined concentration and activity of the test solutions following 10-fold dilution. The behavior of investigated values of activity and concentration also differs in both groups of preparations: while concentration for the preparations not containing polymeric compounds showed on average a 10-fold change following dilution, the 10-fold dilution of preparations containing polymeric compounds resulted in an 18-to-20-fold change of these values.

These trends are not observed for mouthwash containing AmF (Lacalut Sensitive®) as a source of active fluorine, even though it contains polymeric compounds (polyethylene glycol) in its formulation; and the mode of change of both activity and concentration following dilution corresponds to that of mouthwashes that do not contain polymeric compounds. It is noteworthy that after each measurement of AmF mouthwash the electrode continued retaining the potential when being immersed in distilled water and even required additional washing or mechanical cleaning of membrane surface. Therefore, one could presume that high free fluoride to total fluoride ratio (94%) could be due to adsorption of AmF on the surface of the electrode membrane.

The determinable concentrations are almost identical for the Colgate Total Plax® mouthwashes, which only vary by type of coloring agent. However, for the Colgate Total Plax (Classic Mint®) mouthwash, the decrease in the activity of fluoride ions can be explained by the difference in the type of colorant added at approximately the same concentration of total fluoride. Therefore, it is reasonable to assume that the coloring agent added to Colgate Total Plax (Classic Mint®) mouthwash could bind free fluorides.

The analysis of the results, obtained for different series of the same mouthwash, revealed differences in the content of active fluorine for the Oral B® rinses and almost identical values for the Reach Fresh mint® solutions. The comparative analysis of test solutions containing NaF or AmF as a source of fluoride ions showed that there is no significant difference between the measured values of active fluorine and those calculated theoretically, in both procedures. Thus, both organic and inorganic sources of fluoride have similar potential against tooth decay, which can be confirmed by clinical data [29].

A particularly low activity of fluoride ions in comparison with the declared one was observed for the Lacalut Fresh® solution, in which AlF₃ served as the source of fluoride ions. The results of determination of fluoride concentration by standard method showed an abnormal increase in the activity of fluoride ions following the initial dilution with TISAB and the standard behavior following the secondary dilution. When a standard of NaF was added to the solution, a sharp reduction of the potential was observed instead of an increase. Thus, the standard procedure for this preparation turned out to be inapplicable due to a possible interaction between the components of buffer solution TISAB and the components of the test solution. Therefore, to determine the total concentration of fluoride ions, the modified method was selected. To understand the practically 700-fold fluoride ion activity decrease compared to declared values, additional studies were performed, in particular the pH determination of test solutions. The results showed that Lacalut Sensitive® and Lacalut Fresh® solutions have the lowest pH values (4.2 and 4.4, respectively). In the experiment, the pH values of these solutions were adjusted to a value of 7.00, with the electromotive force for the Lacalut Sensitive® solution changing insignificantly (within 2%), whereas for Lacalut Fresh® the change was over 16%. To elucidate the reasons for the observed behavior, we added the precise aliquot of NaF standard solution to the test sample. The addition of the known amount of NaF led to a 6.5-fold increase in the activity of fluoride ions, whereas their theoretically calculated activity should have increased 100-fold. This allows one to conclude that the obtained result is the consequence of fluoride ion binding by the solution components into a non-ionized species of the fluorine compounds (complexes or poorly dissociating dimers hydrogen fluoride H₂F₂) [30]. To evaluate the binding capacity of fluoride ions, the experiment was carried out according to the modified method by doubling the concentration of the standard. In this case, the known concentration of NaF was added to the Lacalut Fresh® solution containing the standard until the activity doubled. The result of the experiment showed that the addition of 75% of the required amount of NaF was followed by the doubling of fluoride ion activity, with the further addition of a minimal amount of fluoride ions, leading to a dramatic increase in the activity (300-fold!). This provides quantitative proof of depletion of fluoride ion binding capacity (i.e., the component binding fluoride ions has completely reacted). Interestingly, the pH value of the solution dramatically changed: from 4,2 to 6.5 (the pH value of the standard solution of NaF is 7.7). The results of the experiment may be attributable to possible generation of strong complexes due to fluoride ion binding by the components of the test solution, particularly by exafluoroaluminate (AlF₃₎ salts (K_inst [AlF₆]³⁻ = 2.1·10^− 21) [31], rather than to formation of non-ionized fluorine compounds due to acidic pH value (e.g., the pH shift of the Lacalut Sensitive® solution resulted in insignificant changes). Thus, a study of fluoride ion activity in the Lacalut Fresh® solution suggests that fluoride ions will not be uptaken by tooth tissue and may even be washed away from it; thus, this supplement will have no effect when applied according to the directions for use of the preparation (5–7 drops/100 ml water).

The present study has some limitations since it does not reproduce in vivo conditions, i.e. dilution by saliva and influence of saliva components on the release of fluoride ions. It is known that phosphatase, one of saliva components, hydrolyzes Na₂PO₃F, releasing fluoride ions [25, 32]. Thus, it may be necessary to add components reproducing artificial saliva during sample preparation in order to avoid underestimated results when measuring Na₂PO₃F mouthwashes. The method of potentiometry itself does not account for the influence of mouthwash components on the work of the electrode.

Conclusions

Mouthwashes are oral hygiene products aimed at enhancing the remineralization process and reducing demineralization due to the presence of fluoride ions; however, mouthwashes should also contain an appropriate amount of free fluorides to provide bioavailability. Ten different mouthwashes analyzed in the present study they revealed various free fluoride:total fluoride ratios due to binding of fluoride ions by mouthwash components or ability of fluoride source itself to form its complexes. The lower concentration of free fluoride in comparison with total one could lead to a decrease in the caries-preventive effect. However, the methods to quantify free fluoride have some disadvantages since they do not reflect in vivo conditions and, therefore, may result in distorted or underestimated values of fluoride content. Thus, there is a need to develop a method for evaluation of free fluorides in mouthwashes for proper updating of national and international guidelines.

Abbreviations

Al³⁺

Aluminium ions

AlF₃

Aluminum fluoride

AmF

Amine fluoride

Ca₁₀(PO₄)₆(OH)₂

Hydroxyapatite

Ca₁₀(PO₄)₆(OH)F

Fluorohydroxyapatite

CaF₂

Calcium fluoride

H₂F₂

Hydrogen fluoride

Na₂PO₃F

Sodium monofluorophosphate

Na₃PO₄

Trisodium phosphate

NaF

Sodium fluoride

NaOH

Sodium hydroxide

SnF₂

Stannous fluoride

TISAB

Total ionic strength adjustment buffer

Authors’ contributions

Conceptualization: VYR, OVN, OIA, DAD, INA, DFH and SAD; Data curation: VYR, OVN, OIA, DAD and INA; Formal analysis: VYR, OVN, OIA, DAD, INA, DFH and SAD; Investigation: VYR, OVN, OIA, DAD, INA, DFH and SAD; Methodology: VYR, OVN, OIA and DAD; Project administration: VYR, OVN,OIA,DAD and DFH; Resources: DAD,INA, DFH and SAD; Supervision: VYR, OVN and OIA; Validation: VYR, OVN,OIA, DAD and DFH; Visualization: VYR, OVN, OIA, DAD and INA; Writing original draft: VYR, OVN, OIA, DAD, INA, DFH and SAD; Writing review & editing: VYR, OVN, OIA, DAD, INA, DFH and SAD; All authors have read and approved the manuscript.

Funding

There was no funding support available for this research.

Availability of data and materials

The data from this study are available upon request, which must be approved by all the authors.

Ethics approval and consent to participate

Not applicable.

Consent for publication

Not applicable.

Competing interests

The authors declare that they have no competing interests.