Skip to main content
. 2019 Nov 18;12(22):3784. doi: 10.3390/ma12223784

Table 6.

Selected physicochemical parameters of treated tannery wastewater after TM application.

Parameter Unit Results * Effect (%) **
pH - 8.5 ± 0.1 Non-significant
Total Dissolved Solids mg/L 19,430 ± 1940 ↑6.5
Total Solids mg/L 19,920 ± 1990 ↑1.1
Suspended Solids mg/L 45.0 ± 4.5 ↓96.9
Color mg Pt/L 175 ± 35 ↓98.4
Chemical Oxygen Demand mg O2/L 2860 ± 430 ↓77.2
Total Organic Content mg/L 1180 ± 180 ↓75.7

* parameter value ± the measurement uncertainty for an extension factor k = 2, ** Effect = (C1C2)×100%C1 (for SS, color, COD, and TOC) and ** Effect = (C2C1)×100%C1 (for TDS and TS), where c1 is the concentration in the raw tannery wastewater, c2 is the concentration in the treated wastewater, ↑ represents an increase in the parameter values, and ↓ represents a decrease in the parameter values.