Skip to main content
. 2019 Dec 27;9:20150. doi: 10.1038/s41598-019-56772-6

Figure 2.

Figure 2

Developed rotating heater stage. (A) Actual set-up of the rotating stage with four separate pairs of heaters. (B) The high temp (orange) and the cold temp (blue) heaters were in contact with the conducting plates connected to separate heat sources. (C) Two pairs of heat sources were placed along the cavities of the fixed stage. (D) A stable temperature for the hot heater and the cold heater was observed for 15 min; 38 °C and 24 °C, respectively. Inset shows how the channel was aligned with the heaters.