. Author manuscript; available in PMC: 2021 Feb 1.

Published in final edited form as: IEEE Trans Ultrason Ferroelectr Freq Control. 2019 Sep 19;67(2):248–257. doi: 10.1109/TUFFC.2019.2942557

TABLE I.

Imaging Parameters for Volumetric Data Acquisition

Type	Parameters	Value
Application-specific requirements	Volume rate	30 Hz
	Volume data acquisition rate	750 Hz
	Total no. of acquired volumes	100
Design parameters	No. of synthetic transmit/receive events	16
	No. of virtual sources	25 (5×5)
	Transmit diverging angle	30°
	Angle interval between virtual sources	7.5°
	Focal distance of a central virtual source	−19 mm
	Pulse-repetition interval	83.25 μs
Transmit parameters	Center frequency	5.2 MHz
	No. of cycles of Tx	1 cycle
	Applied voltage	20 V
System Resource	Required system memory	> 12.2 GB