Table 1.

Design and printing parameters for the scaffolds.

Parameter	Orthogonal	A05W2	A0.5W3	A0.5W4	A0.75W4	A1W4
Amplitude (mm)	-	0.5	0.5	0.5	0.75	1
Wavelength (mm)	-	2	3	4	4	4
Strut diameter (μm)	533 ± 9	497 ± 73	490 ± 36	513 ± 30	510 ± 32	460 ± 58
Strut spacing 1 (μm)	395 ± 6	277 ± 59	350 ± 53	396 ± 72	308 ± 72	336 ± 103
Struts per layer	16	15	15	15	15	15
Temperature 2 (°C)	80	80	80	80	80	80
Print pressure (Pa)	7 × 105	7 × 105	7 × 105	7 × 105	7 × 105	7 × 105
Print speed (mm/s)	4	4	6	5	5	5
E 3 (MPa)	12.4 ± 0.3	10.5 ± 0.5	11.5 ± 0.2	9.5 ± 0.2	10.7 ± 0.2	11.3 ± 0.5
Porosity 4 (%)	56.3 ± 0.7	56.5 ± 1.2	55.9 ± 0.3	61.7 ± 0.9	57.6 ± 0.5	57.2 ± 3.1

¹ Strut-to-strut distance. ² Print temperature. ³ Young’s modulus from compression tests. ⁴ Micro-CT results.