Skip to main content
. 2020 Feb 14;11:891. doi: 10.1038/s41467-020-14747-6

Fig. 5. PL and EL intensities of a working 1.0 DDS film-based LED.

Fig. 5

Simultaneously measured PL and EL intensities at (a) a low driving voltage of 2.1 V and (b) high driving voltage of 2.8 V, respectively. c Alternate EL and PL intensity measurements of a device before and after aging (Black line: first measure the PL intensity on the fresh device; red line: turn off the laser and measure the EL intensities at a constant current density of 100 mA cm−2 for 15 min; blue line: remove bias and measure the PL intensities again; magenta line: turn off the laser and measure the EL intensities again at a constant current density of 100 mA cm−2). The EL intensity measurements at 100 mA cm−2 are the aging processes.