Skip to main content
. 2019 Dec 19;12(1):15. doi: 10.3390/polym12010015

Table 1.

Components of the prepared impregnating dispersions for a square piece of fabric (sized 20 × 20 cm2).

Mixing Components
WPUD Cr ZnO Hals HPT
PUD 13 g (100%) / / / /
PUD/10Cr 13 g (100%) 0.78 g (10%) 1 / / /
PUD/1ZnO 13 g (100%) / 0.08 g (1%) 1 / /
PUD/4ZnO 13 g (100%) / 0.32 g (4%) 1 / /
PUD/7ZnO 13 g (100%) / 0.55 g (7%) 1 / /
PUD/1Hals 13 g (100%) / 0.15 g 2 (1%) 1 /
PUD/4Hals 13 g (100%) / / 0.62 g 2 (4%) 1 /
PUD/7Hals 13 g (100%) / / 1.06 g 2 (7%) 1 /
PUD/1HPT 13 g (100%) / / / 0.39 g 2 (1%) 1
PUD/4HPT 13 g (100%) / / / 1.60 g 2 (4%) 1
PUD/7HPT 13 g (100%) / / / 2.75 g 2 (7%) 1
PUD/10Cr/7ZnO 13 g (100%) 0.78 g (10%) 1 0.55 g (7%) 1 / /
PUD/10Cr/7Hals 13 g (100%) 0.78 g (10%) 1 / 1.06 g 2 (7%) 1 /
PUD/10Cr/7HPT 13 g (100%) 0.78 g (10%) 1 / / 2.75 g 2 (7%) 1

1 Percentages in table have been calculated with respect to the solid content of WPUD. 2 Mass of the aqueous dispersion of UV light stabilizer (HOSTAVIN 3070 DISP or Tinuvin 400) containing the required percentage of active component.