Skip to main content
. 2020 Feb 14;6(2):e03395. doi: 10.1016/j.heliyon.2020.e03395

Table 1.

Tests performed.

Test ID Machine condition
T1 Mechanical fault (eccentric mass on pulley)
T2 Combined electrical and mechanical fault
T3 Normal operation
T4 Electrical fault (5 ohm resistor in phase R)
T5 Electrical fault (10 ohm resistor in phase R)
T6 Electrical fault (15 ohm resistor in phase R)
T7 Electrical fault (20 ohm resistor in phase R)