Table 2.
S. No. | Processing parameter | Value |
---|---|---|
1 | Rotational speed of plate | 200 rpm |
2 | Blower rate | 10 × 14 l/min |
3 | Air flow rate | 10 l/min |
4 | Spray air pressure | 0.5 MPa |
5 | Spray rate of solutiona | 4–7 g/min |
6 | Rotating rate of powder feederb | 0–15 rpm |
7 | Inlet temperature (°C) | 35 |
8 | Outlet temperature (°C) | 25 |
The spray rate was 4 g/min for the first 10 min, and gradually increased to 7 g/min until the end.
The rotating rate of feeder was 0 rpm for the first 10 min, and gradually increased to 15 rpm until the end.