Figure 1.

Diagram of the melt-blowing setup for the fabrication of multifunctional polymeric composites. 1—polymer extruder, 2—fiber-forming head, 3—fiber-attracting nozzle, 4—fiber-embedding mesh, 5—carriage shifting the mesh perpendicular to the extruder axis, 6—trolley enabling the device to exit from under the fiber-forming head (for cutting off the sheet), 7—vacuum installation, 8—enclosure walls, 9—air filter with modifiers, 10—air heater, 11—perforated pipe for dust extraction, 12—electrostatic activator, 13—autotransformer supplying the lower head heater, 14—autotransformer supplying the upper head heater, 15—voltmeter, 16—polymer melt temperature indicator, 17—set of devices for introducing modifiers, 18—autotransformer supplying air heaters, 19—extruder control cabinet.