Skip to main content
. 2020 Feb 22;13(4):981. doi: 10.3390/ma13040981

Figure 7.

Figure 7

Figure 7

(a) Representative scanning electron microscope (SEM) images of the intact surfaces of the tested CAD/CAM materials. (b) Representative SEM images of the surfaces of the tested CAD/CAM materials after sandblasting with 29 μm Al2O3 particles. (c) Representative SEM images of the surfaces of the tested CAD/CAM materials after HF + Si treatment. (d) Representative SEM images of the surfaces of the tested CAD/CAM materials after sandblasting with the CoJet system.