Table 2.

Detailed information on the employed rheometers.

Device	Material	Geometry	Testing Profile	Transformation Equation	Torque Resolution	Angular Resolution
ConTec 5 viscometer *	Concrete	Serrated beater $R_o$ = 145 mm $R_i$ = 100 mm $H$ = 120 mm	Hysteresis loop with rotational velocity range: 0.02 to 0.62 rps	Reiner-Riwlin [1,2]: $\begin{array}{c}T=G+H·N\hfill \\ {\tau }_0=\frac{G}{4\pi h}\left(\frac{1}{R_i^2}-\frac{1}{R_o^2}\right)\frac{1}{\ln \left(R_o/R_i\right)}\hfill \\ \mu =\frac{H}{8{\pi }^{2}h}\left(\frac{1}{R_i^2}-\frac{1}{R_o^2}\right)\hfill \end{array}$	0.1 Nm	126 mrad
HAAKE MARS II rheometer **	Mortar	Hollow vane $R_o$ = 35 mm $R_i$ = 26 mm $H$ = 50 mm	Hysteresis loop with rotational velocity range: 0.01 to 0.50 rps	Affine translation and calibration by reference materials [33]	0.1 nNm	12 nrad

* Produced by ConTec, located in Reykjavik, Iceland. ** Produced by Thermo Fisher Scientific, Karlsruhe, Germany.