Figure - PMC

Skip to main content

An official website of the United States government

Here's how you know

Here's how you know

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

View full-text article in PMC

. 2020 Apr 3;10:5929. doi: 10.1038/s41598-020-62569-9

Search in PMC
Search in PubMed
View in NLM Catalog
Add to search

© The Author(s) 2020

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.

PMC Copyright notice

(A) Analyzing the Saffman-Taylor finger criteria for the bonding quality in a microchannel versus various flow rates. For flow rates lower than 1.5 ml/min, the Saffman-Taylor fingers do not appear, while for flow rates more than 1.5 ml/min, Saffman-Taylor fingers become discernible. (B) Shear rate distribution across a line parallel to the channel width. (C) The more the pressure, the faster the creation of Saffman-Taylor fingers. In the green area, Saffman-Taylor fingers do not appear during the experiments. Also, the results show that there is not any evidence of channel burst or delamination during the bonding quality test.