Skip to main content
. 2020 May 3;202:117771. doi: 10.1016/j.energy.2020.117771

Table 1.

the new feed-in tariff to support renewable and clean energy resources in Iran.

Energy type Specification IRR/kWh (USD/kWh)
The first decade The second decade
Biomass Landfill 2700 (6.43) 1890 (4.5)
Anaerobic digestion of livestock and agriculture wastes and sewage sludge 3500 (8.33) 2450 (5.83)
Waste Incineration and gasification 3700 (8.81) 2590 (6.17)
Wind More than 50 MWa 3400 (8.10) × (0.4–1)b
≤50 MW 4200 (10) × (0.4–1)b
≤1 MW 5700 (13.57) × (0.4–1)b
Solar More than 30 MWa 3200 (7.62) 2240 (5.33)
≤30 MW 4000 (9.52) 2800 (6.67)
≤10 MW 4900 (11.67) 3430 (8.17)
≤100 kW 7000 (16.67) 4900 (11.67)
≤20 kW 8000 (19.05) 5600 (13.33)
Small hydropower (≤10 MW) On the rivers and peripheral equipment for dams 2100 (5) 1470 (3.5)
On the water pipeline transport 1500 (3.57) 1050 (2.5)
Geothermal including drilling and equipment 4900 (11.67) 3430 (8.17)
WHRU Production of electricity from the waste heat recovery unit 2900 (6.90) 2030 (4.83)
Fuel cells 4948 (11.78) 3463.6 (8.25)
Turboexpander Known as turbo-expander or expansion turbine 1600 (3.81) 1120 (2.67)
a

The highest level capacity for the wind and solar farms will be determined by the policy of the ministry of energy on renewable and clean energy development policy, which is following up to 2000 MW in a year by the private sector.

b

During the second decade, the contract fee will calculate based on the capacity factor. For wind farm with capacity factors ≥40% and ≤20% during the first 10 years, the prime fee will multiply in 0.4 and 1, respectively. For capacity factors between 20 and 40%, the prime fee will multiply in a number proportionally.