Table 2.

Cases tested for the two scenarios.

Test series	Case label	PVa(L/s)	PVb(L/s)	MVa(ACRb)	uP1,NMc (m/s)	uP1,TMd (m/s)
Baseline case	MV	0	0	2	0	0
PV used for manikin A only	PVa3	3	0		1.14	0.56
	PVa6	6	0		2.28	1.40
	PVa9	9	0		3.48	2.19
PV used for manikin B only	PVb3	0	3		0	0
	PVb6	0	6		0	0
	PVb9	0	9		0	0
PV used for both manikin A and B	PVab3	3	3		1.14	0.56
	PVab6	6	6		2.28	1.40
	PVab9	9	9		3.48	2.19

^aMV: mixing ventilation.

^bACR: air change rate.

^cu_P1,NM is the PV centerline velocity of a free nozzle jet at P1 (the distance between the nozzle and P1 is 0.36 m) with Manikin A absent (NM), which was measured using a hot wire anemometer (Swema 03+).

^du_P1,TM is the PV centerline velocity at P1 with Manikin A present (TM), which was extrapolated from Fig. 6 in Ref. [23].