Table 1.

Degree of Conversion (DC), Translucency Parameter (TP), Shear Bond Strength, Flexural Strength, Elastic modulus and Depth of Cure of each group. Values in parenthesis indicate standard deviation. There are no significant differences in each parameter among groups.

Group	Degree of Conversion (%) (n=3)	TP (n=5)	Shear bond strength (MPa) (n=10)	Flexural Strength MPa (n=10)	Elastic modulus GPa (n=10)	Depth of Cure (n=3)
ZnM 2.5%	55.60 (0.7)	70.7 (4.0)	11.7 (4.4)	59.24 (16.4)	1.5 (0.2)	5.8 (0.01)
ZnM 5%	59.91 (1.9)	59.4 (8.3)	10.9 (3.3)	48.71 (14.6)	1.4 (0.1)	5.8 (0.05)
SnM 2.5%	58.77 (1.0)	61.3 (4.5)	12.4 (4.1)	56.53 (10.9)	1.4 (0.1)	5.7 (0.1)
SnM 5%	57.16 (2.1)	70.7 (4.5)	15.42 (4.1)	49.98 (12.3)	1.3 (0.1)	5.8 (0.02)
Control	50.24 (8.7)	70.2 (4.5)	10.6 (2.8)	61.21 (6.9)	1.4 (0.2)	5.6 (0.1)