Skip to main content
. 2020 Mar 31;5(6):226–228. doi: 10.1016/j.vgie.2020.02.012

Figure 2.

Figure 2

The process of making of the tape hood. A, Cut the tape to match the diameter of the endoscope. B, Fold the fore end of the adhesive tape. C, Cut the corner on the curve of both tape ends. D, Cut the one inner corner of the tape to prevent mucosal injury. E, Finally, wrap transparent tape around the endoscope tip to be a suitable length. F, The entire process is completed within a few minutes.