Table 2.
Physical parameters of CNC aerogels.
| Density (g cm−3) | BET specific surface area (m2 g−1) | BJH pore volume (m3 g−1) | Porosity (%) | |
|---|---|---|---|---|
| 25CNC | 0.0877 ± 0.0003 | 16.86 | 0.045 | 86.83 ± 4.07 |
| 50CNC | 0.0912 ± 0.0004 | 16.29 | 0.050 | 86.60 ± 0.73 |
| 75CNC | 0.1005 ± 0.0014 | 17.00 | 0.024 | 86.12 ± 1.43 |
| 100CNC | 0.1105 ± 0.0007 | 8.23 | 0.020 | 85.96 ± 1.46 |